Liquid Rubber Waterproof Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.
Liquid Rubber Waterproof Sealant is a soft and flexible membrane. It is not designed to be a walking surface. You can tackiness once it's cured. This will dissipate over time. You can wash the surface with a salt water solution to help.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Small air bubbles can form from using a roller. This will dissipate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see Large blisters, this is usually an indication of moisture underneath the membrane.
Liquid Rubber Textured Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 0.5 mm (20 mil, 0.0197") will take approximately 3 - 4 hours.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Liquid Rubber MetalSafe Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Small air bubbles can form from using a roller. This will dissapate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see large blisters, this is usually an indication of moisture underneath the membrane.
Liquid Rubber Foundation Sealant is used for protecting and waterproofing interior and exterior structures (Foundations, Basement Walls, Shower Liners).
Liquid Rubber Foundation Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Small air bubbles can form from using a roller. This will dissipate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see large blisters, this is usually an indication of moisture underneath the membrane.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
Liquid Rubber Waterproof Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.
Liquid Rubber Waterproof Sealant is a soft and flexible membrane. It is not designed to be a walking surface. You can tackiness once it's cured. This will dissipate over time. You can wash the surface with a salt water solution to help.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Small air bubbles can form from using a roller. This will dissipate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see Large blisters, this is usually an indication of moisture underneath the membrane.
Liquid Rubber Textured Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 0.5 mm (20 mil, 0.0197") will take approximately 3 - 4 hours.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Liquid Rubber MetalSafe Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Small air bubbles can form from using a roller. This will dissapate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see large blisters, this is usually an indication of moisture underneath the membrane.
Liquid Rubber Foundation Sealant is used for protecting and waterproofing interior and exterior structures (Foundations, Basement Walls, Shower Liners).
Liquid Rubber Foundation Sealant is water based and curing is dependent on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time between.
Small air bubbles can form from using a roller. This will dissipate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see large blisters, this is usually an indication of moisture underneath the membrane.
Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.
Yes, you can coat directly over shingles provided they are clean.
Yes, provided it is clean and dry at the time of application.
For some projects a primer may be needed. Consult project page for recommendations. Seams, cracks and transitions (floor to wall) should be detailed with our Liquid Rubber Geo-Textile Fabric or Liquid Rubber Seam Tape.Contact Liquid Rubber Tech Support to help you select the correct products for your project.
FOUNDATION SEALANT
Yes, this product remains soft and flexible after full cure and may have a slightly tacky feeling, not suitable as a walking surface.
Yes, this product works great to waterproof under tiles and can be tiled over using a modified thin-set grout. Click the link for full instructions. https://liquidrubber.ca/pages/shower-liners
Yes, on indoor applications, with an acrylic/latex paint. Will require 2-3 coats.
Yes, we recommend protecting the coating during backfilling with dimple board or rigid Styrofoam insulation.
Yes, Our Liquid Rubber Geo-Textile Fabricshould be applied to any cracks, seams and where the wall meets the footing, using our 3 course method.
Our Liquid Rubber Metalsafe Sealantcan withstand temperatures up to +80˚C (176℉) in the summer and it stays flexible down to -40˚C (-40℉) in the winter.
No, due to the chemistry of the product the black color will bleed through the paint.
Yes, but be sure that the coating has fully cured.
For some projects a primer may be needed. Consult project page for recommendations. Seams, cracks and transitions (floor to wall) should be detailed with our Liquid Rubber Geo-Textile Fabric or Liquid Rubber Seam Tape.Contact Liquid Rubber Tech Support to help you select the correct products for your application.
POLYURETHANE SEALANT
Yes, our Liquid Rubber Polyurethane Sealantremains rubbery after full cure, but is more durable than our other elastomeric coatings and suitable as a walking surface.
For some projects a primer may be needed. Consult project page for recommendations. Seams, cracks and transitions (floor to wall) should be detailed with our Liquid Rubber Geo-Textile Fabric or Liquid Rubber Seam Tape.Contact Liquid Rubber Tech Support to help you select the correct products for your project.
The Liquid Rubber Polyurethane Deck Coating stands up well to harsh weather and winter. It's best to use a plastic snow shovel to remove snow and try not chop at the surface.
Yes, you can alternate between smooth and textured to “dial in” the desired finish.
You should wait 48 hours until light foot traffic and 5-7 days before placing furniture.
We expect a service life of 5 years depending on usage and environmental conditions. You can recoat and touch up the surface if it gets damaged. Just clean the area well, and re-apply.
We expect a service life of 5 years. Service life can vary depending on usage and environmental conditions. You can recoat and touch up the surface if it gets damaged. Just clean the area well, and re-apply.
We recommend using our Multi-Purpose Primer. Seams, cracks and transitions (floor to wall) should be detailed with our Liquid Rubber Geo-Textile Fabric.
NEOPOND SEALANT
Our Liquid Rubber Neopond Sealant is a premium product that doesn’t emulsify and turn brown, dries to a tack free finish, requires less material and does not require any special curing process before adding fish and plants. It is also the same cost per square foot as our other coatings.
We recommend pressure washing the metal clean and allowing it to fully dry.
Any seams, pipes, vents or HVAC units should be detailed with our Liquid Rubber Seam Tape. Any fasteners should be dabbed with sealant prior to full application.
Our products are not compatible with oil based paint or products that contain silicone.
Liquid Rubber Seam Tape is a self-adhesive, peel and stick, reinforcement tape. It works well for Metal, Wood, EPDM and PVC.
Liquid Rubber Geo-Textile Fabricis a polyester reinforcement fabric that gets embedded into the coating while it’s still wet. It works well for concrete and masonry or anywhere a lower profile is needed. Consult the project page for recommendations or contact Liquid Rubber Tech Support to help you select the correct product for your application.
Our products can be applied using a paint brush, a ⅜ inch (10mm) microfiber roller or heavy duty airless paint sprayer.
We recommend a Graco GH 833 or equivalent airless paint sprayer.
r products can be thinned with 5% distilled water by volume.
PLACING AN ORDER
We accept all major payment providers.
Yes, as soon as your order ships, you will receive an email with tracking information.
Yes, you can call 1-855-592-1049 toll free and one of our sales representatives would be happy to place your order.
We ship by Fedex, UPS and Canada Post.
Contact Liquid Rubber Technical Support @ 1-855-592-1049
Once your order's gone through, you should receive an email with an order number. If you don't receive an email, just double check that you've spelled your email address correctly. If you've checked and you're still unsure, give us a call toll free at 1-855-592-1049.
REFUNDS
Our refund policy is free returns up to 30 days from the date of purchase. Between 30-90 days the customer is responsible for shipping. The cost of shipping will be deducted from your refund when we receive the products. $10 for 1 gallon pails, $30 for 5 gallon pails. Contact Liquid Rubber @ 1-855-592-1049 for return labels.
After 90 days from the date of purchase, there are no returns or refunds.
Purchases Made on Amazon - From 0 - 90 days, customer is responsible for the cost of shipping back. The cost of shipping will be deducted from your refund when we receive the products. $10 for 1 gallon pails, $30 for 5 gallon pails. Email or call us with your order number to initiate a return.
SHIPPING
Order cut off time is 2pm EST for processing. If you order before 2pm EST, generally you receive your order in 2 business days for qualifying products. Qualifying products show 2 day shipping on the product page based off your shipping zip code (see below). Sample jars do not qualify for 2 day shipping. If 1 of your products does not qualify for 2 day shipping, your order will default to standard shipping. Generally 3-4 business days. You will receive tracking info when your order ships.
Other locations, please contact Liquid Rubber toll free @ 1-855-592-1049 for shipping quotes.
Any order over $49.95 gets free domestic shipping.
For orders under $49.95, a flat shipping rate will apply of $15.
FEATURED PRODUCTS
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
ENVIRONMENTALLY FRIENDLY - Liquid Rubber Color Waterproof Sealant is water based, containing no Solvents or VOC's. This means it's safe to use indoors and outdoors with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
USED FOR: Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more...
EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or Good Quality Paint Sprayer
HIGHLY FLEXIBLE - UV Stable - Final membrane has over 1000% Elongation and the Sun will not degrade the product.
Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2.0mm) (DFT) membrane.
Vertical Surfaces
Apply a minimum final thickness of 1 gallon per 25 sq ft (2.3 sq/m). It should require around 2-3 heavy coats to achieve a 30 mil (0.76mm) (DFT) membrane.
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot
Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
Apply next heavy coat when it's dry to touch (typically 6-8 hours), make sure there is no uncured material underneath. Tacky is ok
Generally you can apply 1-2 coats per day
Apply all material until you use up the required amount
Do not combine Black products with Colored products, use one or the other
For larger areas, pour out and spread around with a broom, roller or squeegee
If corrosion/rust is present, use a water-based rust primer.
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
ENVIRONMENTALLY FRIENDLY - Liquid Rubber Color Waterproof Sealant is water based, containing no Solvents or VOC's. This means it's safe to use indoors and outdoors with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
USED FOR: Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more...
EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or Good Quality Paint Sprayer
HIGHLY FLEXIBLE - UV Stable - Final membrane has over 1000% Elongation and the Sun will not degrade the product.
Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2.0mm) (DFT) membrane.
Vertical Surfaces
Apply a minimum final thickness of 1 gallon per 25 sq ft (2.3 sq/m). It should require around 2-3 heavy coats to achieve a 30 mil (0.76mm) (DFT) membrane.
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot
Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
Apply next heavy coat when it's dry to touch (typically 6-8 hours), make sure there is no uncured material underneath. Tacky is ok
Generally you can apply 1-2 coats per day
Apply all material until you use up the required amount
Do not combine Black products with Colored products, use one or the other
For larger areas, pour out and spread around with a broom, roller or squeegee
If corrosion/rust is present, use a water-based rust primer.
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be.  Please, please reach out to us with any questions. We want to make your project a success.
The Product was easy to work with!!! Now let's see the durability!!!
T
Teresa Walsh
Made my pond brand new!
Our pond had sprung a slow leak, and rather than hire a pond guy to come out and try to find/fix the leak, we took it upon ourselves to DIY it. I'm so glad we did. We cleaned out all the muck that had accumulated over the last 20 + years, and saved our precious goldfish and some lilies ~ and our pond is now better-looking than it EVER has been. The Liquid Rubber sealed up whatever leak there was (we did 3 coats), and it just looks so GOOD now! So glad fwe heard about this product!
j
john taylor
Initial application
Hello!
Yes! I applied the first coat to my 10X10 storage shed, and am now waiting for rain to determine if I need to apply another coat.i say this because before I bought your product I sprayed the roof with aerosol water proofing products and
Believe I got a lot of the leaks stopped, but not all’s my thoughts are taking me to the “possibility” I may need “just “ one coat of liquid rubber to finish the job.if not,then i have “half”a pail left to apply additional coats. Will comment when we get some serious rain….thanks!
John t.
R
Robert Harle
GOOD Product
With the liquid rubber and the seam tape Both
Work grate together
And clean up it easy warm soap and water
D
Dan Fugit
Cantilever Decking
There is a cantilever decking area of my home the has leaked for years. Fluctuating temperature combined with small movement between the 2 structures have rendered every sealant I’ve tried over the years useless. Liquid Rubber is looking to be the solution after surviving freezing temperatures in the evening & 80s during the day with no leaks from the 1st heavy rain.
ENVIRONMENTALLY FRIENDLY - Liquid Rubber Waterproof Sealant is water based, containing no Solvents or VOC's. This means it's safe to use indoors and outdoors with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
USED FOR: All Roofs, Gutters, Planter Boxes, Foundations, Basements, Ponds, Sheds, Mobile Homes, Metal, Wood, Concrete and more
EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer
HIGHLY FLEXIBLE - UV Stable - Final membrane has over 1000% Elongation and the Sun will not degrade the product.
Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2.0mm) (DFT) membrane.
Vertical Surfaces
Apply a minimum final thickness of 1 gallon per 30 sq ft (2.8 sq/m). It should require around 3-4 heavy coats to achieve a 30 mil (0.76mm) (DFT) membrane.
Tips
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot
Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
Apply next heavy coat when it's dry to touch (typically 12-24 hours), make sure there is no uncured material underneath. Tacky is ok
Generally you can apply 1-2 heavy coats per day
Apply all material until you use up the required amount
Do not combine Black products with Coloured products, use one or the other
For larger areas, pour out and spread around with a broom, roller or squeegee
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be.  Please, please reach out to us with any questions. We want to make your project a success.
The Product was easy to work with!!! Now let's see the durability!!!
T
Teresa Walsh
Made my pond brand new!
Our pond had sprung a slow leak, and rather than hire a pond guy to come out and try to find/fix the leak, we took it upon ourselves to DIY it. I'm so glad we did. We cleaned out all the muck that had accumulated over the last 20 + years, and saved our precious goldfish and some lilies ~ and our pond is now better-looking than it EVER has been. The Liquid Rubber sealed up whatever leak there was (we did 3 coats), and it just looks so GOOD now! So glad fwe heard about this product!
j
john taylor
Initial application
Hello!
Yes! I applied the first coat to my 10X10 storage shed, and am now waiting for rain to determine if I need to apply another coat.i say this because before I bought your product I sprayed the roof with aerosol water proofing products and
Believe I got a lot of the leaks stopped, but not all’s my thoughts are taking me to the “possibility” I may need “just “ one coat of liquid rubber to finish the job.if not,then i have “half”a pail left to apply additional coats. Will comment when we get some serious rain….thanks!
John t.
R
Robert Harle
GOOD Product
With the liquid rubber and the seam tape Both
Work grate together
And clean up it easy warm soap and water
D
Dan Fugit
Cantilever Decking
There is a cantilever decking area of my home the has leaked for years. Fluctuating temperature combined with small movement between the 2 structures have rendered every sealant I’ve tried over the years useless. Liquid Rubber is looking to be the solution after surviving freezing temperatures in the evening & 80s during the day with no leaks from the 1st heavy rain.
ENVIRONMENTALLY FRIENDLY - Liquid Rubber Waterproof Sealant is water based, containing no Solvents or VOC's. This means it's safe to use indoors and outdoors with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
USED FOR: All Roofs, Gutters, Planter Boxes, Foundations, Basements, Ponds, Sheds, Mobile Homes, Metal, Wood, Concrete and more
EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer
HIGHLY FLEXIBLE - UV Stable - Final membrane has over 1000% Elongation and the Sun will not degrade the product.
Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2.0mm) (DFT) membrane.
Vertical Surfaces
Apply a minimum final thickness of 1 gallon per 30 sq ft (2.8 sq/m). It should require around 3-4 heavy coats to achieve a 30 mil (0.76mm) (DFT) membrane.
Tips
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot
Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
Apply next heavy coat when it's dry to touch (typically 12-24 hours), make sure there is no uncured material underneath. Tacky is ok
Generally you can apply 1-2 heavy coats per day
Apply all material until you use up the required amount
Do not combine Black products with Coloured products, use one or the other
For larger areas, pour out and spread around with a broom, roller or squeegee
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
Great Product and a very helpful and responsive customer service team!
T
TERRY NAYLOR
Liquid Rubber Cool Foot Deck & Dock Coating
M
Mike Guthrie
Liquid Rubber Cool Foot Deck & Dock Coating
The coating really went on smooth and stuck to the deck well. I like the anti-slip surface. I would highly recommend the product.
P
Paul Cowan
The shipment that made it
My experience with liquid rubber was excellent all the way around.Tim Adam my customer service sales representative was outstanding.when my shipment was damaged by the shipper,twice he made sure that I received my materials quickly.he was very friendly and helpful every step of the way.the product exceeded my expectations.truly an incredible product.They are always there to answer any questions you might have .Thank you Tim
Liquid Rubber Cool Foot Deck & Dock Coating is a brush, roll and spray high-performance, acrylic; elastomeric coating that reduces heat transfer by up to 35% compared to regular paint. The Cool Foot Deck & Dock Coating cures into a durable, seamless; colored waterproof membrane.
Contains no solvents, is non-toxic, VOC-free, and is non-flammable. The cured membrane has excellent solar reflectivity and UV stability.
The Next Generation of Innovative Protective Coatings
Reduces heat transfer by up to 35%
No solvents, non-toxic and VOC-Free
UV resistant
Seamless traffic grade membrane
Easy to apply
No tackiness
Color options available
Coverage
Apply minimum final thickness of 1 gallon per 40 sq ft (3.7 sq m). It should require around 3-4 heavy coats for your final membrane. High traffic areas require 1 gallon per 30 sq ft (2.8 sq m).
Tips
Apply using a roller, brush or high quality paint sprayer to provide a seamless and fully adhered membrane to most substrates.
Ensure a clean, dry surface free of dirt, dust and loose flaky paint. Can be applied over paint or stain
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
Great Product and a very helpful and responsive customer service team!
T
TERRY NAYLOR
Liquid Rubber Cool Foot Deck & Dock Coating
M
Mike Guthrie
Liquid Rubber Cool Foot Deck & Dock Coating
The coating really went on smooth and stuck to the deck well. I like the anti-slip surface. I would highly recommend the product.
P
Paul Cowan
The shipment that made it
My experience with liquid rubber was excellent all the way around.Tim Adam my customer service sales representative was outstanding.when my shipment was damaged by the shipper,twice he made sure that I received my materials quickly.he was very friendly and helpful every step of the way.the product exceeded my expectations.truly an incredible product.They are always there to answer any questions you might have .Thank you Tim
Liquid Rubber Cool Foot Deck & Dock Coating is a brush, roll and spray high-performance, acrylic; elastomeric coating that reduces heat transfer by up to 35% compared to regular paint. The Cool Foot Deck & Dock Coating cures into a durable, seamless; colored waterproof membrane.
Contains no solvents, is non-toxic, VOC-free, and is non-flammable. The cured membrane has excellent solar reflectivity and UV stability.
The Next Generation of Innovative Protective Coatings
Reduces heat transfer by up to 35%
No solvents, non-toxic and VOC-Free
UV resistant
Seamless traffic grade membrane
Easy to apply
No tackiness
Color options available
Coverage
Apply minimum final thickness of 1 gallon per 40 sq ft (3.7 sq m). It should require around 3-4 heavy coats for your final membrane. High traffic areas require 1 gallon per 30 sq ft (2.8 sq m).
Tips
Apply using a roller, brush or high quality paint sprayer to provide a seamless and fully adhered membrane to most substrates.
Ensure a clean, dry surface free of dirt, dust and loose flaky paint. Can be applied over paint or stain
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
This product exceed my expectations in ease of application, ability to stick to substrate and so far in performance in sealing our leaking water truck tank. Very pleased with the product! It saved us from spending $13,900.00 for a new tank.
J
Jeff Howell
Liquid Rubber MetalSafe Sealant
D
Dale Hagins
Liquid Rubber MetalSafe Sealant
M
Mike E.
Metelsafe sealant
Using to seal a rusted support post in basement to maintain and avoid having to make a costly replacement. Product is everything they advertise it to be. Easy to apply and cleans up well with soap and water. The only reason I didn’t give it the highest rating is because I only needed a quart but was forced to buy a gallon. Customer service person was very helpful and knowledgeable. I definitely recommend this product, and look forward to finding other uses.
R
Ray
Thanks
Your service has been very helpful and the product has exceeded my expectations
Flexible Corrosion Coating
Ultrahigh corrosion protection
Can be applied directly over lightly rusted surfaces
Creates a long lasting waterproof membrane
Excellent adhesion, chemical and UV resistance
Resists cracking, chipping, impact and abrasion
Resistant to freeze/thaw cycles
Withstands extreme hot and cold environments
Easy to apply roller, brush & spray equipment
Available in BLACK ONLY
For Flat and Ponding Surfaces:
Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) (DFT) membrane.
For Vertical Surfaces:
Apply a minimum final thickness of 1 gallon per 30 sq ft (2.8 sq/m). Apply 2-3 heavy coats to achieve a 30 mil. (0.76mm) (DFT) membrane.
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot
Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
Apply next heavy coat when it's dry to touch (typically 12-24 hours), make sure there is no uncured material underneath. Tacky is ok
Generally you can apply 1-2 heavy coats per day
Apply all material until you use up the required amount
Do not combine Black products with Coloured products, use one or the other
For larger areas, pour out and spread around with a broom, roller or squeegee
Apply above 5C/40F
Curing time depends on temperature, humidity and airflow
Apply next coat(s) as soon as possible not allowing extended time between if possible
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
This product exceed my expectations in ease of application, ability to stick to substrate and so far in performance in sealing our leaking water truck tank. Very pleased with the product! It saved us from spending $13,900.00 for a new tank.
J
Jeff Howell
Liquid Rubber MetalSafe Sealant
D
Dale Hagins
Liquid Rubber MetalSafe Sealant
M
Mike E.
Metelsafe sealant
Using to seal a rusted support post in basement to maintain and avoid having to make a costly replacement. Product is everything they advertise it to be. Easy to apply and cleans up well with soap and water. The only reason I didn’t give it the highest rating is because I only needed a quart but was forced to buy a gallon. Customer service person was very helpful and knowledgeable. I definitely recommend this product, and look forward to finding other uses.
R
Ray
Thanks
Your service has been very helpful and the product has exceeded my expectations
Flexible Corrosion Coating
Ultrahigh corrosion protection
Can be applied directly over lightly rusted surfaces
Creates a long lasting waterproof membrane
Excellent adhesion, chemical and UV resistance
Resists cracking, chipping, impact and abrasion
Resistant to freeze/thaw cycles
Withstands extreme hot and cold environments
Easy to apply roller, brush & spray equipment
Available in BLACK ONLY
For Flat and Ponding Surfaces:
Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) (DFT) membrane.
For Vertical Surfaces:
Apply a minimum final thickness of 1 gallon per 30 sq ft (2.8 sq/m). Apply 2-3 heavy coats to achieve a 30 mil. (0.76mm) (DFT) membrane.
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot
Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
Apply next heavy coat when it's dry to touch (typically 12-24 hours), make sure there is no uncured material underneath. Tacky is ok
Generally you can apply 1-2 heavy coats per day
Apply all material until you use up the required amount
Do not combine Black products with Coloured products, use one or the other
For larger areas, pour out and spread around with a broom, roller or squeegee
Apply above 5C/40F
Curing time depends on temperature, humidity and airflow
Apply next coat(s) as soon as possible not allowing extended time between if possible
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
I did not receive my product, but the customer service team took care of me and sent a replacement! Thank you
D
David Brook
Works Great
Recovered outdoor deck with ease and turned out great
R
Russell Newell
what I needed
Very thick like a shake. Easy to roll on if you work fast. Texture is very texture. I used 4 coats and it made a good thick barrier.
D
Dave Keevern
Amazing product
I bought a house with a deck built on a rubber membrane 13 years ago. The top layer started peeling years ago but I didn't know what to do with it. I found this and was emailing customer service with my questions. They were awesome. Application was far easier than I ever expected and it came out looking fantastic! I even did the wooden stairs which were originally just painted since I liked how well the deck looked. I highly recommend this!!
You take pride in the condition, appearance, and performance of your property. After all, your home is something you can pass on for generations—it can be part of your lasting legacy
It’s our mission to help you fulfill that endeavor, and we’re doing exactly that for countless satisfied customers through our Polyurethane Deck Coating. It’s the hidden ingredient that can preserve your property for decades...
Delivering Pristine Quality You Can Share With Your Family
Here at Liquid Rubber, we understand that quality and performance hold paramount importance. That’s why our polyurethane deck coating is designed to be 10 times stronger than traditional deck coatings.
Our Polyurethane Deck Coating delivers a hard waterproof surface to keep your property in pristine condition, and provides a fiercely durable protective layer to keep your property performing at the highest level.
From family cookouts to fishing adventures with the grandkids, your deck or dock will be a constant source of happiness and everlasting memories for years to come when it’s wearing Liquid Rubber Polyurethane Deck Coating as armor.
Produces a Look You Can Be Proud Of
Quality and performance are absolutely necessary, but we know the appearance of your property matters too. That’s why our Polyurethane Deck Coating comes in various attractive color and texture options that can be applied to deck boards, plywood, and concrete.
Liquid Rubber Polyurethane Deck Coating gives you a look you will be proud to share with your family, friends, and guests.
Meanwhile, the coating’s waterproof membrane has excellent solar reflectivity and UV stability to enhance appearance and performance. Plus, it’s easy to apply.
Protect your surfaces with Liquid Rubber Polyurethane Deck Coating to preserve your property—and those everlasting memories—for generations.
Apply minimum final thickness of 1 gallon per 40 sq ft (3.7 sq m). It should require around 3-4 heavy coats. High traffic areas require 1 gallon per 30 sq ft (2.8 sq m).
Tips
Apply using a 3/8 (10mm) roller, brush or paint sprayer.
Apply to clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
For extra adhesion, performance and longevity and to create a moisture vapor barrier, use 1 heavy coat ofMulti-Purpose Primer.
Brush products between deck boards.
Apply each coat in an alternate direction to the last coat to ensure even coverage.
Apply final coat in the direction of slope for positive drainage.
Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (typically 4-6 hours)
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot.
Avoid contact with solvents and solvent based cleaners. adhesives, and paints.
Do not combine Black products with Coloured products.
Do not allow to freeze.
Curing time depends on temperature, humidity and airflow.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.
Wait 3 days for light foot traffic.
Wait 5-7 days before placing furniture back on surface.
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.
I did not receive my product, but the customer service team took care of me and sent a replacement! Thank you
D
David Brook
Works Great
Recovered outdoor deck with ease and turned out great
R
Russell Newell
what I needed
Very thick like a shake. Easy to roll on if you work fast. Texture is very texture. I used 4 coats and it made a good thick barrier.
D
Dave Keevern
Amazing product
I bought a house with a deck built on a rubber membrane 13 years ago. The top layer started peeling years ago but I didn't know what to do with it. I found this and was emailing customer service with my questions. They were awesome. Application was far easier than I ever expected and it came out looking fantastic! I even did the wooden stairs which were originally just painted since I liked how well the deck looked. I highly recommend this!!
You take pride in the condition, appearance, and performance of your property. After all, your home is something you can pass on for generations—it can be part of your lasting legacy
It’s our mission to help you fulfill that endeavor, and we’re doing exactly that for countless satisfied customers through our Polyurethane Deck Coating. It’s the hidden ingredient that can preserve your property for decades...
Delivering Pristine Quality You Can Share With Your Family
Here at Liquid Rubber, we understand that quality and performance hold paramount importance. That’s why our polyurethane deck coating is designed to be 10 times stronger than traditional deck coatings.
Our Polyurethane Deck Coating delivers a hard waterproof surface to keep your property in pristine condition, and provides a fiercely durable protective layer to keep your property performing at the highest level.
From family cookouts to fishing adventures with the grandkids, your deck or dock will be a constant source of happiness and everlasting memories for years to come when it’s wearing Liquid Rubber Polyurethane Deck Coating as armor.
Produces a Look You Can Be Proud Of
Quality and performance are absolutely necessary, but we know the appearance of your property matters too. That’s why our Polyurethane Deck Coating comes in various attractive color and texture options that can be applied to deck boards, plywood, and concrete.
Liquid Rubber Polyurethane Deck Coating gives you a look you will be proud to share with your family, friends, and guests.
Meanwhile, the coating’s waterproof membrane has excellent solar reflectivity and UV stability to enhance appearance and performance. Plus, it’s easy to apply.
Protect your surfaces with Liquid Rubber Polyurethane Deck Coating to preserve your property—and those everlasting memories—for generations.
Apply minimum final thickness of 1 gallon per 40 sq ft (3.7 sq m). It should require around 3-4 heavy coats. High traffic areas require 1 gallon per 30 sq ft (2.8 sq m).
Tips
Apply using a 3/8 (10mm) roller, brush or paint sprayer.
Apply to clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
For extra adhesion, performance and longevity and to create a moisture vapor barrier, use 1 heavy coat ofMulti-Purpose Primer.
Brush products between deck boards.
Apply each coat in an alternate direction to the last coat to ensure even coverage.
Apply final coat in the direction of slope for positive drainage.
Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (typically 4-6 hours)
Avoid hot, direct, intense sun when applying. Mornings and Evenings are best if it's blistering hot.
Avoid contact with solvents and solvent based cleaners. adhesives, and paints.
Do not combine Black products with Coloured products.
Do not allow to freeze.
Curing time depends on temperature, humidity and airflow.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.
Wait 3 days for light foot traffic.
Wait 5-7 days before placing furniture back on surface.
