Metal Roofs
[description]
Metal Roofs have been around for many years and have leaked for many years. There hasn't been a solid solution to achieve that water-tight roof until now. The Liquid Rubber System provides a long lasting waterproof membrane which users can easily apply.
[/description]
[steps]
- Ensure a clean, dry surface: It's recommended that users power wash the surface
- Tighten and/or replace fasteners
- Bridge joints, seams, vents, skylights etc., with Liquid Rubber Seam Tape
- Apply Liquid Rubber Coating of choice to fasteners, tight seams and vents
- For areas with rust, if your final coating is colour, prime with two coats of Multi-Purpose Primer or a Rust Primer to prevent bleed through
- Apply your selected Liquid Rubber waterproof sealant to entire roof
- Read full Application Guideline in Documents below
- See Products Used below
[/steps]
[tips]
- Apply the next heavy coat when the product is dry to the touch and nothing is wet underneath. Tacky is ok
- Do not combine colored and black products. Use one or the other
- Apply next heavy coat when product is dry to touch and nothing is wet underneath
- Use up all required material to ensure a long lasting membrane
- Avoid hot, direct, intense sunlight during application
- Apply above 10C/50F
- Remove painter's tape while coating is still wet
- Do not apply if dew or rain is forecast
[/tips]
[coverage]
- Coverage varies by product used. See Product Page for specific coverage of that product
[/coverage]
[case-studies]
- Liquid Rubber Waterproof Sealant - Metal Roof Coating - Quonset Hut
- Liquid Rubber Waterproof Sealant - Metal Roof Coating - DIY Home Owner
- Liquid Rubber Color Waterproof Sealant - Residential Complex - Metal Roof Coating
- Liquid Rubber Color Waterproof Sealant - Ice Arena - Metal Roof Coating
[/case-studies]
[videos]
-
Metal Roof Application Example - Liquid Rubber Color Waterproof Sealant
Watch the video