Planter Boxes - Liquid Rubber Coating
Liquid Rubber Foundation Sealant is a liquid applied coating that cures into a seamless waterproof membrane. Applications include: concrete, wood, masonry, metal etc. This product is water-based and contains no solvents, is VOC-free and is non-toxic. For color options use our Color Waterproof Sealant.
Steps
- Ensure a clean, dry surface
- Bridge interior joints, seams etc., with Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile
- Build up heavy coats to achieve required thickness. 40 mil (1 mm) Dry Film Thickness
- COVERAGE - Apply a minimum final thickness of 1 gallon per 20 sq ft (1.9 sq/m). It should require around 3-4 heavy coats to achieve a 40-60 mil. (1-1.5mm) (DFT) membrane.
- See below for products used
Tips
- Dust or dirt can cause loss of adhesion
- Product stays soft, flexible and may have some tackiness
- Apply the next heavy coat when the product is dry to the touch and nothing is wet underneath. Tacky is ok
- Apply material until you use up the required amount
- Use a roller or brush to apply
- Apply above 10C (50F)
- Curing time depends on temperature, humidity and airflow
- Safe for Fish and Plants
- Do not apply later in the day if Dew is forecast
Colors
-
Original Black
-
Brilliant White
-
Light Grey
-
Med Grey
-
Dark Grey
-
Tan
-
Brown
-
Hunter Green
Due to Computer Monitors, Colours may not be exactly as shown
Videos
The Ultimate RV Roof Maintenance and Repair Guide
Your complete guide to getting the most out of your motorhome roof
FREE GUIDE | RV Roof Repair