Free Domestic Shipping on Orders over $75.00 All prices in US Dollars

Sealing Concrete or Wood - Liquid Rubber Polyurethane Clear Coat

There are many projects that require a transparent, yet durable, waterproofing solution to maintain the beauty of a decorative finish. Liquid Rubber Polyurethane Clear Coat was designed to meet those needs and provide a beautiful “wet look” while protecting and sealing.

Projects Include

  • Wooden Decks
  • Landscape Borders
  • Exposed Aggregate Finishes
  • Unsealed Colored Concrete on Porches/Walkways
  • Unsealed Stamped Concrete on Porches/Walkways
  • Unsealed Concrete Pavers
  • Brick and Cinderblock

Steps

  1. Test an inconspicuous area for discoloration prior to full application
  2. Clean the areas with Liquid Rubber Deck and Patio Cleaner
  3. For concrete surfaces, etch with Liquid Rubber Concrete Etch
  4. Power wash to ensure a clean surface, allow to fully dry
  5. Apply an even coat of Liquid Rubber Polyurethane Clear Coat
  6. Apply with brush, roller or spray
  7. Apply the next coat when the product is dry to the touch
  8. Minimum 2-3 coats
  9. Coverage - Approximately 150 sq.ft. - 300 sq.ft. per 1G (3.78L). Depending on porosity and profile
  10. See below for products used

Tips

  • Dust or dirt can cause loss of adhesion
  • Apply material until you use up the required amount
  • Apply above 10C (​50F) and rising
  • Curing time depends on temperature, humidity and airflow
  • Avoid application if rain or dew is forecast within 24 hrs
  • Apply next coat(s) as soon as possible not allowing extended time between if possible
  • Diy Application

    Check all our DIY applications

    Learn more
  • Contact us

    Get advice from experts

    Contact us

Purchase Products

Liquid Rubber Deck and Patio Cleaner

$29.95

Liquid Rubber Polyurethane Clear Coat

$69.95
Size:

Liquid Rubber Concrete Etch

$27.95

The Ultimate RV Roof Maintenance and Repair Guide

Your complete guide to getting the most out of your motorhome roof

FREE GUIDE | RV Roof Repair