Free Domestic Shipping on Orders over $75.00 All prices in US Dollars

Torch Down/Mod-Bit Roofs

[description]

Liquid Rubber Coatings are designed for Flat and Sloped Roofs. 

[/description]

[steps]

  1. Ensure a clean, dry surface and substrate: Do not coat over saturated roofs
  2. Bridge joints, seams, vents, skylights etc., with Liquid Rubber Seam Tape
  3. Apply Liquid Rubber Coating of choice
  4. See Products Used below

[/steps]

[tips]

  • Dust or dirt can cause loss of adhesion
  • For larger areas you can pour out the Liquid Rubber Coating on the surface and roll or broom around
  • Apply next heavy coat when product is dry to touch and nothing is wet underneath.  Tacky is ok
  • Use up all required material to ensure a long lasting membrane
  • Avoid hot, direct, intense sunlight during application
  • Apply above 10C/50F and rising
  • Curing time depends on temperature, humidity and airflow
  • Remove painter's tape while coating is still wet
  • Do not apply if dew or rain is forecast

[/tips]

[coverage]

  • Coverage varied by product.  See individual Products for coverage rates

    [/coverage]

    [case-studies]

    [/case-studies]
    [videos] [/videos]

     

    [documents]

    [/documents]