We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be.  Please, please reach out to us with any questions.  We want to make your project a success.

Flexible Heavy-Duty Coating

• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Waterproof Sealant is water based, containing no Solvents or VOC's. This means it's safe to use indoors and outdoors with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
• USED FOR: All Roofs, Gutters, Planter Boxes, Foundations, Basements, Ponds, Sheds, Mobile Homes, Metal, Wood, Concrete and more
• See DIY APPLICATIONS for more specific info
• EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer
• HIGHLY FLEXIBLE - UV Stable - Final membrane has over 1000% Elongation and the Sun will not degrade the product.
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With LIQUID RUBBER SEAM TAPE or LIQUID RUBBER GEO-TEXTILE where possible movement may occur.

Coverage

• Flat/Ponding Surface

  Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil  (1.5-2.0mm) (DFT) membrane.

• Vertical Surfaces

  Apply a minimum final thickness of 1 gallon per 30 sq ft (2.8 sq/m). It should require around 3-4 heavy coats to achieve a 30 mil  (0.76mm) (DFT) membrane.
  
  

Tips

• Avoid hot, direct, intense sun when applying.  Mornings and Evenings are best if it's blistering hot
• Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
• Apply next heavy coat when it's dry to touch (typically 12-24 hours), make sure there is no uncured material underneath.  Tacky is ok
• Generally you can apply 1-2 heavy coats per day
• Apply all material until you use up the required amount
• Do not combine Black products with Coloured products, use one or the other
• For larger areas, pour out and spread around with a broom, roller or squeegee
• If corrosion/rust is present, use Liquid Rubber MetalSafe Sealant
• Use EPDM Primer for EPDM substrates.  Use Multi-Purpose Primer for PVC and Concrete Surfaces
• Apply above 5C/40F
• Curing time depends on temperature, humidity and airflow
• Apply next coat(s) as soon as possible not allowing extended time between if possible
• Safe for Fish and Plants
• Membrane will turn Brown in ponding situations due to surfactants.  Will dissipate over time as the water cycles
• Do not apply later in the day if Dew is forecast

• Patio Over Wine Room
• Gazebo Roof
• Residential Metal Roof
• Under Patio Paver Deck
• Corner Gutter Repair
• Gutter Repair

Liquid Rubber Waterproof Sealant Data Sheet

Liquid Rubber Waterproof Sealant Safety Data Sheet

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be.  Please, please reach out to us with any questions.  We want to make your project a success.

Flexible Heavy-Duty Coating

• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Color Waterproof Sealant is water based, containing no Solvents or VOC's. This means it's safe to use indoors and outdoors with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
• USED FOR: Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more...
• See DIY APPLICATIONS for more specific info
• EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or Good Quality Paint Sprayer
• HIGHLY FLEXIBLE - UV Stable - Final membrane has over 1000% Elongation and the Sun will not degrade the product.
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With LIQUID RUBBER SEAM TAPE or LIQUID RUBBER GEO-TEXTILE where possible movement may occur.

• Flat/Ponding Surface

  Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil  (1.5-2.0mm) (DFT) membrane.

• Vertical Surfaces

  Apply a minimum final thickness of 1 gallon per 25 sq ft (2.3 sq/m). It should require around 2-3 heavy coats to achieve a 30 mil  (0.76mm) (DFT) membrane.

• Avoid hot, direct, intense sun when applying.  Mornings and Evenings are best if it's blistering hot
• Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
• Apply next heavy coat when it's dry to touch (typically 6-8 hours), make sure there is no uncured material underneath.  Tacky is ok
• Generally you can apply 1-2 coats per day
• Apply all material until you use up the required amount
• Do not combine Black products with Colored products, use one or the other
• For larger areas, pour out and spread around with a broom, roller or squeegee
• If corrosion/rust is present, use a water-based rust primer.
• Use EPDM/TPO Primer for EPDM/TPO substrates.  Use Multi-Purpose Primer for PVC and Concrete Surfaces
• Apply above 10C/50F
• Curing time depends on temperature, humidity and airflow
• Apply next coat(s) as soon as possible not allowing extended time between if possible
• Safe for Fish and Plants
• Do not apply later in the day if Dew is forecast

• Patio Over Wine Room Case Study
• Gazebo Roof Case Study
• Contemporary Pond Case Study
• Concrete Koi Pond Case Study
• Residential Metal Roof Case Study
• Under Patio Paver Deck Case Study
• EPDM Gutter Case Study
• Corner Gutter Repair Case Study
• Gutter Repair Case Study

• Liquid Rubber Colour Waterproof Sealant
  Data Sheet Download the Sheet
• Liquid Rubber Colour Waterproof Sealant
  SDS Read the SDS

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be.  Please, please reach out to us with any questions.  We want to make your project a success.

Liquid Rubber Foundation Sealant/Basement Coating

• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Foundation Sealant is water based, containing no Solvents or VOC's.  This means it's safe to use indoors and outdoors with no special breathing apparatus like solvenated products need.  You're safe, your children are safe and your pets are safe.  We believe you should have a choice in purchasing high quality products that are safe for you and the environment
• USED FOR - Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more....
• EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane.  Open the container and start using.  You can close the container and use later if you have left over material.  No pot life or working time like 2 component products.  Apply by Brush, Roller or High Quality Piston Paint Sprayer
• HIGHLY FLEXIBLE - Final membrane has over 900% Elongation.
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With LIQUID RUBBER SEAM TAPE or LIQUID RUBBER GEO-TEXTILE where possible movement may occur.
• Not meant as constant walking surface due to tackiness

• Flat/Ponding Surface

  Apply a minimum final thickness of 1 gallon per 15sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil. (1.5-2mm) (DFT) membrane.

• Vertical Surfaces

  Exterior Foundation Wall

  Apply a minimum final thickness of 1 gallon per 20 sq ft (1.9 sq/m). It should require around 3-4 heavy coats to achieve a 40-60 mil. (1-1.5mm) (DFT) membrane.

  Interior Foundation Wall

  Apply a minimum final thickness of 1 gallon per 50 sq ft (4.6 sq/m). It should require around 2-3 heavy coats to achieve a 20-30 mil. (0.5-0.76mm) (DFT) membrane.

Tips

• Apply using a 3/8 (10mm) roller, brush or appropriate paint sprayer.
• Apply to a clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
• Apply when temperature is above 5˚C/40˚F or 10˚C/50˚F and rising depending on product selected.
• For extra adhesion, performance and longevity and to create a moisture vapor barrier, use 1 heavy coat of Multi-Purpose Primer.
• Apply each coat in an alternate direction to the last coat to ensure even coverage.
• Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (refer to product data sheet for dry times)
• Avoid contact with solvents and solvent based cleaners, adhesives, and paints.
• Apply using a 3/8 (10mm) roller, brush or appropriate paint sprayer.
• Apply to a clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
• Apply when temperature is above 5˚C/40˚F or 10˚C/50˚F and rising depending on product selected.
• For extra adhesion, performance and longevity and to create a moisture vapor barrier, use 1 heavy coat of Multi-Purpose Primer.
• Apply each coat in an alternate direction to the last coat to ensure even coverage.
• Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (refer to product data sheet for dry times)
• Do not apply in wet conditions or if rain or dew is forecast within 24 hours.
• Do not allow to freeze.
• Do not combine Black products with Colored products.
• Wrap brushes in plastic to use for next coat.
• Remove painters tape/blocking while coating is still wet.
• Not meant for long term UV exposure.
• Not meant as a constant walking surface.
• Initial cure (set) within 48-72 hours as per specific product recommendations.
• Curing depends on temperature, humidity and airflow and specific product used.
• Extend rain gutters and slope grade away from your building.
• Ensure weeping tile is working properly channeling water away from your building.
• Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
• For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
• It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.
• Safe for Plants. (not meant for Plants you'll be eating. ie. Fruits and Veggies)
• Do not allow to freeze.
• Do not combine Black products with Colored products.
• Wrap brushes in plastic to use for next coat.
• Remove painters tape/blocking while coating is still wet.
• Not meant for long term UV exposure.
• Not meant as a constant walking surface.
• Initial cure (set) within 48-72 hours as per specific product recommendations.
• Curing depends on temperature, humidity and airflow and specific product used.
• Extend rain gutters and slope grade away from your building.
• Ensure weeping tile is working properly channeling water away from your building.
• Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
• For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
• It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.
• Safe for Plants. (not meant for Plants you'll be eating. ie. Fruits and Veggies)

• Liquid Rubber Foundation Sealant - Waterproof Under Patio Deck
• Liquid Rubber Foundation Sealant - Waterproof Under Synthetic Grass 
• Liquid Rubber Foundation Sealant - Patio Over Wine Room

• Liquid Rubber Exterior Foundation Application Guideline
• Liquid Rubber Foundation Sealant Data Sheet
• Liquid Rubber Foundation Sealant SDS

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be.  Please, please reach out to us with any questions.  We want to make your project a success.

Protect Your Everlasting Family Memories

Any recreational vehicle gives you the chance to create memories that will last a lifetime. From traveling across the country to going camping for the weekend, your RV is the sanctuary that allows you to have a home away from home.

Yet RVs are notorious for leaks, and those leaks can quickly ruin a family vacation...and the lifelong mental souvenirs that were supposed to come with it. Liquid Rubber’s RV Roof Coating never lets another leak steal away those precious memories.

Keeping Your Family Safe, Cool, and Happy

The RV’s biggest strength is the potential for it to deliver you and your family on unforgettable journeys. Unfortunately, the RV also has a weakness. Vents, skylights, tears, and more leave the RV vulnerable to leaks and overheating that can turn your dream vacation into a nightmare.

With Liquid Rubber RV Roof Coating, those vulnerabilities disappear. It cures into a waterproof membrane, giving your vehicle the armor it needs to deliver you and your family safely to and from your destination.

And this solar reflective and UV resistant coating keeps your RV cool, meaning you’ll be comfortable throughout your entire journey.

Eliminates the Costly Repair Services Keeping You From Your Next Vacation

Delivering the highest quality possible is what drives Liquid Rubber because it serves as the gateway to our customers’ happiness.

When it comes to our RV Roof Coating, some of that happiness comes from helping you avoid those costly repairs that normally accompany any recreational vehicle.

This environmentally friendly coating keeps your RV from falling victim to the perils of leaks, and DIY application means virtually

• Apply a minimum final thickness of 1 gallon per 50 sq ft (4.65 sq/m). It should require around 2-3 heavy coats to achieve your final membrane.

• 1 x 5 gallon pail of RV Roof Coating will coat RV's up to 30 feet. Be sure to use up all material.

Tips

• Apply using a 3/8 (10mm) roller, brush or paint sprayer.
• Apply to a clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
• Apply when temperature is above 10C/50F and rising.
• Use Liquid Rubber RV Smart Cleaner to clean the surface.
• Use Liquid Rubber EPDM Primer for EPDM roofs and Liquid Rubber Multi-Purpose for most others. (We do not have a primer for TPO roofs at this time.)
• Apply each new coat in an alternate direction to the previous coat to ensure even thickness.
• Apply next coat when dry to the touch (typically 6-8 hours, tacky is OK).
• Typically cures in 48 hours.
• Avoid hot, direct, intense sun when applying.
• Avoid contact with solvents and solvent based cleaners, adhesives and paints.
• Do not allow to freeze.
• Do not combine black products with the colored products.
• Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
• EPDM is a rubber sheet coating.
• TPO and PVC are a plastic type sheet membrane. (we do not currently carry a primer for TPO)
• Generally you can apply 1-2 coats per day
• Apply material until you use up the required amount
• Curing time depends on temperature, humidity and airflow
• Remove painters tape as soon as possible (while coating is still wet).
• If corrosion is present use a water-based rust primer.
• Method: Work in manageable sections. Apply the Liquid
  Rubber EPDM Primer to one side of the RV (leaving the other
  side uncoated so that you can walk and work on it. ) Allow
  the Liquid Rubber EPDM Primer to dry for 1-2 hours. Apply
  the Liquid Rubber RV Roof Coating over the Liquid Rubber
  EPDM Primer, leaving 4-6 inches of the primer exposed so that
  you will be able to overlap it when you begin the second side.
  Allow the Liquid Rubber RV Roof Coating to dry enough to
  walk on, and repeat the process for the second side.
• Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
• For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
• If your RV is still under warranty be sure to contact the manufacturer to ensure you do not void the warranty.
• It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.

Application Guideline - RV Roofs

Liquid Rubber RV Roof Coating Data Sheet

Liquid Rubber RV Roof Coating Safety Data Sheet

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be.  Please, please reach out to us with any questions.  We want to make your project a success.

You take pride in the condition, appearance, and performance of your property. After all, your home is something you can pass on for generations—it can be part of your lasting legacy

It’s our mission to help you fulfill that endeavor, and we’re doing exactly that for countless satisfied customers through our Polyurethane Deck Coating. It’s the hidden ingredient that can preserve your property for decades...

Delivering Pristine Quality You Can Share With Your Family

Here at Liquid Rubber, we understand that quality and performance hold paramount importance. That’s why our polyurethane deck coating is designed to be 10 times stronger than traditional deck coatings.

Our Polyurethane Deck Coating delivers a hard waterproof surface to keep your property in pristine condition, and provides a fiercely durable protective layer to keep your property performing at the highest level.

From family cookouts to fishing adventures with the grandkids, your deck or dock will be a constant source of happiness and everlasting memories for years to come when it’s wearing Liquid Rubber Polyurethane Deck Coating as armor.

Produces a Look You Can Be Proud Of

Quality and performance are absolutely necessary, but we know the appearance of your property matters too. That’s why our Polyurethane Deck Coating comes in various attractive color and texture options that can be applied to deck boards, plywood, and concrete.

Liquid Rubber Polyurethane Deck Coating gives you a look you will be proud to share with your family, friends, and guests.

Meanwhile, the coating’s waterproof membrane has excellent solar reflectivity and UV stability to enhance appearance and performance. Plus, it’s easy to apply.

Protect your surfaces with Liquid Rubber Polyurethane Deck Coating to preserve your property—and those everlasting memories—for generations.

• Apply minimum final thickness of 1 gallon per 40 sq ft (3.7 sq m). It should require around 3-4 heavy coats.  High traffic areas require 1 gallon per 30 sq ft (2.8 sq m). 

Tips

• Apply using a 3/8 (10mm) roller, brush or paint sprayer.

• Apply to clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.

• Apply above 10C/50F.
• Use Liquid Rubber Deck and Patio Cleaner to prep wood.
• For extra adhesion, performance and longevity and to create a moisture vapor barrier, use 1 heavy coat of Multi-Purpose Primer.  
• Brush products between deck boards.

• Apply each coat in an alternate direction to the last coat to ensure even coverage.

• Apply final coat in the direction of slope for positive drainage.

• Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (typically 4-6 hours)

• Avoid hot, direct, intense sun when applying.  Mornings and Evenings are best if it's blistering hot.
• Avoid contact with solvents and solvent based cleaners.
  adhesives, and paints.
  
• Do not combine Black products with Coloured products.
• Do not allow to freeze.
• Curing time depends on temperature, humidity and airflow.
• Do not apply in wet conditions (including fog and dew) or
  if rain is forecasted within 24 hours.
  
• Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
• For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
• It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.
• Wait 3 days for light foot traffic.
• Wait 5-7 days before placing furniture back on surface.

• Liquid Rubber Polyurethane Deck Coating Case Study - Doggie Daycare Concrete Floor
• Liquid Rubber Polyurethane Deck Coating Case Study - Exterior Concrete Patio
• Liquid Rubber Polyurethane Deck Coating Case Study - Fire Rescue Boat
• Liquid Rubber Polyurethane Deck Coating Case Study - Deck Boards

• Liquid Rubber Polyurethane Wood Deck Coating Application Guideline
• Liquid Rubber Polyurethane Deck Coating Smooth Deck Data Sheet
• Liquid Rubber Polyurethane Deck Coating Textured Deck Data Sheet
• Liquid Rubber Polyurethane Deck Coating Smooth Deck SDS
• Liquid Rubber Polyurethane Deck Coating Textured Deck SDS